Geotab Adapter installation – Heavy Duty Vehicle Installation
For heavy duty vehicles equipped with 9 pin OBDII port, the 9 pin OBD II T-harness is very easy to install and can be used to place the GO device behind the dash and frees up the OBDII port.
Universal 9-pin (OBD II) Straight Extension harness:
- For older vehicles equipped with 6 pin OBDII port, Geotab also offers 6 pin harness. Installation steps are the same as 9 pin extension harness.
Please click on the link for further details OBD II T-harness installation
Heavy Duty Vehicle Installation – Universal 9-pin (OBD II ) T-harness:
Complete Setup
Universal 9 pin OBDII T-Harness Kit for the GO device
For heavy duty vehicles equipped with 9 pin OBDII port, the 9 pin OBD II T-harness is very easy to install and can be used to place the GO device behind the dash and frees up the OBDII port. Here are the instructions showing you how to install the T-Harness. 9 Pin OBD II T-harness installation
After the device is plugged in, it may take a short drive (5 minutes, above 15km/h) for the GPS to register it’s location properly.
After this short drive, all of the lights should stay on until you turn off the vehicle.
